Muxlab VGA 4x1 Switcher Manual de usuario descargar pdf (Pagina 15)

age 15

3.6. Port Control Operation

The VGA 4x1 Switcher features built-in firmware that

allows commands from an ASCII terminal to be sent

directly to the device via either a USB or RS232

connection (not both simultaneously). If connecting with

an RS232 cable, ensure that the cable has the straight-

through configuration shown in Figure 6.

Figure 6: RS232 Cable Configuration

Port Control is performed with either the MuxLab

Control Center software, described in Section 3.7, or

with a terminal emulator such as the one available under

Windows with the ASCII Command Set described in

Appendix A. Please note that USB to RS232 converter

cables are not supported.

DB9

Male

DB9

Female

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Muxlab VGA 4x1 Switcher Manual de usuario Pagina 15